Sony BDP-S2000ES Blu-ray Player Firmware / Software Update [v3.70]

May 26, 2008 Category: Firmware, Sony Firmware | Tags: Firmware, Sony, Sony Firmware

Look for the fimware / software update for your Sony BDP-S2000ES Blu-ray Player? We got it. Be sure to read all information thoroughly before downloading and installing any files.

Information

Manufacturer : Sony
Type : Firmware
Version : 3.70
Release date : May 09, 2008
File name : UPDATE_BDPS2000ES_VER0370.EXE
File size : 52.28 MB

Description

This utility updates the Sony BDP-S2000ES firmware to version 3.70.

Download

Download Sony BDP-S2000ES Blu-ray Player Firmware / Software Update [v3.70]
Sony BDP-S2000ES Firmware Update Instructions [v3.70]

Sony BDP-S2000ES Firmware Update Instructions

Please read all information thoroughly before downloading and installing any files.

Compatible Operating Systems

• Microsoft® Windows® XP MCE
• Microsoft® Windows® XP
• Microsoft® Windows® Me
• Microsoft® Windows® 98SE
• Microsoft® Windows® 2000 with Service Pack 4
• Microsoft® Windows Vista® Ultimate
• Microsoft® Windows Vista® Home Premium
• Microsoft® Windows Vista® Home Basic
• Microsoft® Windows Vista® Business

Version 3.70 Improvement

This utility updates the BDP-S2000ES firmware to version 3.70, and provides the following benefits:

Improvements over firmware version 3.60:

• Improves BD-Java compatibility to enhance interactivity with some BD-ROMs.

Additional improvements over original firmware:

• Compatibility with BD-R/RE discs burned by the Click to Disc™ and Click to Disc™ Editor software included with some VAIO® computers
• Improves BD-Java compatibility to enhance interactivity with some BD-ROMs.

For VAIO® Computer Owners

In order to use Click to Disc and Click to Disc Editor software to create discs compatible with your Blu-ray Disc™ player, it is necessary to update your Click to Disc and Click to Disc software to version 1.1 or higher. Please check the software version and your computer’s Drivers & Software page for available updates.

Important Notes

• Please follow the update instructions carefully. Failure to follow the instructions may interrupt the update process and may cause the player to be unresponsive or to require repair.
• Do not power off the player or disconnect it from the AC power outlet. Loss of power during the installation of the firmware update may cause the player to be unresponsive or to require repair.
• Use a brand new CD-R disc to burn the firmware update. The player may not be able to correctly read a dirty disc or a disc with scratches.
• Recommended operating system for the computer that will download the firmware update:
  » Microsoft® Windows® 98SE or later is needed.
  » Windows Vista®, Windows XP, or Windows 2000 (Service Pack 4) is recommended.
• A drive with CD disc burning capability is required to create the update disc.
• —
  
• If you do not have a CD burner in your computer, Sony will provide a free disc with the firmware update. Click here to order the firmware update from Sony Online Support.
  NOTE: If you have questions or require assistance, please contact Sony customer call center at 866-909-7669.
• A CD-R disc is required to create the update disc.
  NOTE: A CD-R disc is highly recommended. Do not use a CD-RW disc.
• Installing this firmware update will return all your personal settings to the factory default settings. After installing the update it will be necessary to reconfigure your personal settings.
• In order to perform the firmware update, it is necessary to have the BDP-S2000ES correctly connected to a compatible television.
• It is highly recommended to print out these instructions as a reference during the installation process.

Check Current Firmware Version

• Power on the television and make sure it is tuned to the inputs to which the BDP-S2000ES player is connected.
• Power on the BDP-S2000ES Blu-ray Disc™ player.
• If the player starts to play a disc, press the “STOP” button and wait until the blue Sony Blu-ray Disc screen is displayed on the television before proceeding.
• On the remote control (RMT-B100A), press the SYSTEM MENU button.
• At the “System Menu” screen, use the arrow keys on the remote control to highlight “Setup” and then press the ENTER button.
• At the “Setup” screen, use the arrow keys on the remote control to highlight “Video Setup” and then press the ENTER button.
• Use the arrow keys on the remote control to highlight “TV Type” and then press the ENTER button.
• On the remote control, press the “BLUE” button.
• The firmware version currently installed on the BDP-S2000ES will be listed on the television screen. If the version number is 3.70 or higher, it is not necessary to install this firmware update.

Download Instructions

• Download the UPDATE_BDPS2000ES_VER0370.EXE file to a temporary or download directory (please note this directory for reference).
• Go to the directory where the file was downloaded and verify that the size of the UPDATE_BDPS2000ES_VER0370.EXE file is 54,820,352 bytes.
  • Right-click the UPDATE_BDPS2000ES_VER0370.EXE file, and click “Properties”.
  • On the “UPDATE_BDPS2000ES_VER0370.EXE Properties” screen, verify that the “Size:” listed is “52.2 MB (54,820,352 bytes)”.
    NOTE: The “Size on disk:” listed may be different. That is normal.
  • If the file size is different than the “54,820,352 bytes”, please download the UPDATE_BDPS2000ES_VER0370.EXE file again.
• Double-click the UPDATE_BDPS2000ES_VER0370.EXE file to begin the process to extract the firmware update.
• At the UPDATE_BDPS2000ES_VER0370.EXE dialog box, type a location, or click the “Browse…” button to select a location for the uncompressed update, and then click “OK”. The UPDATE_BDPS2000ES_VER0370.ISO file will be extracted to the specified location.
• Use the “Burn Image” option of your CD burning software to create the update disc from the UPDATE_BDPS2000ES_VER0370.ISO file.
• CD Burning Notes:
  • Do not create a data disc. In order for the update disc to work, you must create it using the “Burn Image” option of your CD burning software.
  • The update disc must be finalized. Be sure to select “Finalize CD (No further writing possible)” in your DVD burning software to finalize the update disc.
  • If write errors occur during the CD burning process, discard the disc and create a new update disc.
  • Burning the disc using packet writing software is not supported.
  • Do not use an update disc created using any other process than the one described above.

Updating Firmware

WARNING!! Do not power off the player or disconnect it from the AC power outlet. Doing so may damage the player to the point of requiring repair.
WARNING!! Do not press any buttons, except as instructed, until the update is complete. Doing so may damage the player to the point of requiring repair.

NOTE: The firmware update process takes a minimum of 30 minutes.

• Power on the television and make sure it is tuned to the inputs to which the BDP-S2000ES player is connected.
• Power on the BDP-S2000ES Blu-ray Disc player.
• Place the update disc in the player, and close the disc tray.
• The update starts automatically and “DISC-DWLD” appears on the player front panel display.
• At the beginning the player will automatically power off and then, after awhile, back on. This is an initial read sequence and is normal.
• A series of different messages will appear on the front panel display.
  NOTE: If you are updating from firmware version 1.55 or lower, after approximately two to three minutes the disc tray will open.
  WARNING!! Do not remove the disc from the player and do not close the tray. The update is still in progress.
• The firmware update is complete when “DL OK” appears on the player front panel display, and the disc tray opens.
  WARNING!! Do not operate or power off the player until this message is displayed. Doing so may result in your player being unresponsive and requiring repair.
• Remove the update disc from the player.
• Power on the BDP-S2000ES player.
  NOTE: It takes about 90 seconds for the player to display pictures on the television when the player is powered on for the first time after installing the update.
• Check the firmware version (See “Check Current Firmware Version”).
  NOTE: If the version number is 3.70, the firmware update was successful.

If The Update Disc Does Not Eject

If the update disc does not eject even though “DL OK” is displayed, please follow the steps below.

• Power on the BDP-S2000ES Blu-ray Disc player.
• Immediately after “POWER ON” is displayed on the front panel display (within one second), press the “STOP” button on the player. The disc tray opens and the player turns off automatically.
• NOTE: Pressing the “STOP” button on the remote control does not work. It is necessary to press the “STOP” button on the BDP-S2000ES player.
• If the disc tray still does not open, repeat these steps but vary the timing of pressing the “STOP” button in step 2.

Firmware Update FAQ

Click the image below to view to complete FAQ of the Sony Blu-ray Player Firmware update.

 

Download

Download Sony BDP-S2000ES Blu-ray Player Firmware / Software Update [v3.70]
Sony BDP-S2000ES Firmware Update Instructions [v3.70]

Popularity: 6% [?]

Related Products

• Sony BDP-S300 Blu-ray Player Firmware / Software Update [v3.90]
• Sony BDP-S1 Blu-ray Player Firmware / Software Update [v3.80]
• Sony PS3 Firmware / Software Update Version 2.41 - July 8, 2008
• Sharp BD-HP20 Blu-ray Player Firmware / Software Update [vHU8060200] June 09, 2008
• Sony Playstation 3 - 40GB HDD, HDMI, Blu-ray.

Comments